Tuesday, March 1, 2011

Create a Skype Logo

Select the next instrument to represent three circles (keeping pressed the Shift button represent firstly the upper circle, then the middle one and finally the lowest one) with the sizes indicated next picture.

Create Skype Logo in Photoshop CS


Blending Options-Gradient Overlay




Create Skype Logo in Photoshop CS

Gradient’s parameters.




Create Skype Logo in Photoshop CS

Create Skype Logo in Photoshop CS

Copy the new made layer 2 times and minimize one copy with Free Transform selection. Fill 0% on the layers and apply the demonstrated parameters below.

Create Skype Logo in Photoshop CS

Blending Options-Stroke

Create Skype Logo in Photoshop CS

Gradient’s parameters.

Create Skype Logo in Photoshop CS

The second copy must be minimized too. Fill 0% on the layers and apply the next instrument (holding the Alt button) to represent an ellipse which will delete the unnecessary part. Use the sizes from next step.

Create Skype Logo in Photoshop CS

Blending Options-Gradient Overlay

Create Skype Logo in Photoshop CS

Gradient’s parameters.

Create Skype Logo in Photoshop CS

Add next the text, keeping the type, size and the color indicated in the next table.

Create Skype Logo in Photoshop CS

Create Skype Logo in Photoshop CS

Merge down now all the layers, representing the blue icon with S letter in a group (CTRL+SHIFT+E). Copy the new made group and apply Free Transform action to turn it around. Click on this

Create Skype Logo in Photoshop CS

on the layers and make use of the next instrument, exactly like it is demonstrated next step.

Create Skype Logo in Photoshop CS

The final result is this one!
Read More.

Bookmark and Share

Photoshop Graffiti Tutorial

Open the photo with the textured surface.



Go to Image -> Duplicate




A new window will come up asking you to give the duplicate image a name (wall copy)



Now save the duplicate image as wall copy.psd. Close the duplicate image.


Back at our original Image and paste in new layer photo of your favorite singer.




Go to Filter->Distort->Displace



You can experiment with the settings to find the ones that better suit you needs.



A window will come up asking you to select a displacement map. Find and select the duplicate image that you created at the start of the tutorial (“wall copy.psd”) and press open.



Here is the result of the displacement filter.



Change the layer blending mode. I used “Hard Light”. When using different colors of the background layer is different than the one I used for this tutorial, other blending modes may work as well:




Ok now you are going to have to experiment here.

With a lighter image you are gonna wanna go to Filter>Brush Strokes>Ink Outlines:



With a darker image you are gonna wanna go to Filter>Distort>Diffuse Glow:



My final results:



Now add text graffiting I suggest downloading this font.



Add your text with color #FFE600.


Rasterize and appply the same effect with Filter->Distort->Displace.


Set the layer blending mode to “Overlay”.


Go to Blending Options>Stroke


Size: 2px

Position: Outside

Blend Mode: Normal


Opacity: 100%

Fill Type: Color

#8B2828


My results:





Read More.

Bookmark and Share

Monday, January 4, 2010

How to create and define Photoshop Brushes

Two basic general features that characterize brushes set limits on what can be successfully turned into a brush. And what can be a brush is almost anything.

  • First is color. Photoshop uses gray scale info while defining brushes. You can make a brush out of a colorful image but converting your document to Grayscale will give you a better idea of what you are doing. Anything that is white becomes transparent (0% opacity), anything black becomes 100% opaque and any other color turns translucent (opacity somewhere between 0 and 100%).
  • Second limitation is size: there is a maximum brush size possible. From Photoshop 7.0 on it's 2500 px x 2500 px (and 999 px for earlier versions). The larger the brush is created the better, so we strongly encourage you to create large brushes (ideally about 2500 px x 2500 px). The reason is you can’t increase the diameter of your brush beyond its original size without blurring.

There are plenty of ways to create a brush. You may start from a scanned image, a vector graphics,
a raster graphics or a photo.

We will guide you through a process of creating a sample brush in Adobe Photoshop CS4 from
a scanned ink stroke.

Step 1

Create a black ink stroke on a white paper and scan it. The optimum scan settings will vary depending on your scanner quality. Here, we set the resolution to 200 dpi.

Stroke Scan

Step 2

Open your scan file in Photoshop and change the color mode to 8-bit Grayscale (Image > Mode).

Step 3

You need some time to clean the image. With your bare eye it may look ok but it’s important to always make sure that there are no artifacts. Great tools to do that are (alternatively) levels and threshold. Open the Image > Adjustments > Levels panel and drag the left slider in the Input Level panel right to the end

Pohotoshop level panel

or open the Image > Adjustments > Threshold panel and drag the slider right to the end

Photoshop threshold panel

It may happen that the background turns grey (after levels adjustment)

Background

or totally black (after threshold). That means the white background is not truly white. Note, in this step always choose ‘Cancel’ - we only want to identify possible artifacts.

Step 4 (Fixing the background - if necessary)

We will use Levels.

Drag the right slider in the Input Levels panel slightly left. That turns the brightest pixels white. To check if the right slider is moved enough, drag the left slider right to meet the right one. If the background stays white, the right slider position is ok. Bring the left one back to its origin.

Step 5 (Further cleaning - if necessary)

Once the background is fixed repeat Step 3. Now you can easily see plenty of very tiny ink stains all around our stroke. Some of them may add some character to you brush, but we want to get rid of the majority of them.

level

There is a trick how to do that effectively and easily. Create a white background layer. Duplicate your stroke layer and turn its visibility off. Apply levels or threshold adjustment as you did before to the stroke copy layer but this time hit the OK button. Now, create a mask and start to paint over all unwanted stains with a black brush.

Photoshop trick 1

Once all of the stains are masked, drag the mask to the stroke layer, turn it on and delete the copy.

Photoshop trick 2

Step 6

Your stroke is now clean, you can adjust it a bit, again using Image > Adjustments > Levels (or Brightness/Contrast, Exposure, Curves, Threshold). Hit OK once you get an appearance you are satisfied with

Level final

Step 7

Now, with a stroke ready to be turned into a brush

Stroke final

go to Edit > Create Brush Preset. Choose a name for your brush and hit OK.

Create brush preset

A new brush is created. You did not have to select your image since Photoshop recognizes all pixels that are not white and include them into a new brush area. However, if you select a portion of your image, only the selection will be turned into a brush.

Test your brush and enjoy!

What next? If you want to export your brushes (eg. send them to myPhotoshopBrushes.com) go to Edit > Preset Manager, choose Brushes as the Preset Type and select all your new brushes holding the Shift key. Pressing the Save Set button saves the whole pack as an .abr file.

Brush preset manager

If you decide to share your (own!) brushes with us, please send us a link to your site and/or a zipped .abr file as well as a terms of use info (required) and a 300 px x 300 px preview.

SOURCE : http://myphotoshopbrushes.com


Read More.

Bookmark and Share

Tuesday, August 11, 2009

winamp change your AIMP with a more classic look to its


this simple picture as I do for example uplopad image software play songs, I used to use winamp, but now I prefer to use a more simple AIMP and the computer does not make us weak and I also like the look of it is quite interesting if we tough in the image of on whether you like the view as the image display on the
if you like with this software you can download here


good job for all the success you always


<---------------------------------------------->

download AIMP

Read More.

Bookmark and Share
Related Posts Plugin for WordPress, Blogger...
saifuddin
aceh
BANDA ACEH
NANGGROE ACEH DARUSALAM
aceh, male, 23000
nanggroe aceh darusalam
Work: 06517555275
Fax: 06517555275
uddin_bireun@yahoo.com
Visit MyBlogLog and get a signature like this!
Add to Google Reader or Homepage Internet Marketing & SEO (Affiliates) - TOP.ORG Google bot last visit powered by [0051] Software Top Blogs powered by [0051] Yahoo bot last visit powered by  [0051]

SOFTWARE DOWNLOAD AND TUTORIAL PHOTOSHOP CORELDRAW ©Template Blogger Green by Dicas Blogger. SOFTWARE DOWNLOAD AND TUTORIAL PHOTOSHOP CORELDRAW ©Template Editing by Udin Sira.

TOP